Dell Technologies SONiC Deploy (D-SNC-DY-00) Certification Sample Questions

SONiC Deploy Dumps, D-SNC-DY-00 Dumps, D-SNC-DY-00 PDF, SONiC Deploy VCE, Dell Technologies D-SNC-DY-00 VCE, Dell Technologies SONiC Deploy PDFThe purpose of this Sample Question Set is to provide you with information about the Dell Technologies SONiC Deploy exam. These sample questions will make you very familiar with both the type and the difficulty level of the questions on the D-SNC-DY-00 certification test. To get familiar with real exam environment, we suggest you try our Sample Dell Technologies SONiC Deploy Certification Practice Exam. This sample practice exam gives you the feeling of reality and is a clue to the questions asked in the actual Dell Technologies Certified SONiC Deploy certification exam.

These sample questions are simple and basic questions that represent likeness to the real Dell Technologies D-SNC-DY-00 exam questions. To assess your readiness and performance with real time scenario based questions, we suggest you prepare with our Premium Dell Technologies SONiC Deploy Certification Practice Exam. When you solve real time scenario based questions practically, you come across many difficulties that give you an opportunity to improve.

Dell Technologies D-SNC-DY-00 Sample Questions:

01. Which three items are in the output of the show mclag brief command when using Enterprise SONiC?
a) Peer Link, Peer Address, and VRRP Status
b) System MAC, Peer Address, and Keepalive Interval
c) Source Address, Peer Address, and AS Number
d) System MAC, Mclag System MAC, and System IP Address
 
02. An administrator wants to manually install Enterprise SONiC on a switch without NOS installed. Where should the administrator initialize the installation process?
a) SONiC MF-CLI
b) BIOS
c) SONiC linux shell
d) ONIE
 
03. Which are two characteristics of the route redistribution feature in Enterprise SONiC?
a) Advertises routes from one routing protocol to another.
b) Route-maps can process routes for route redistribution.
c) Static routes cannot be redistributed.
d) Only OSPF and BGP routes can be redistributed.
 
04. Match the following VXLAN terms with their descriptions:
VXLAN Term
VXLAN Tunnel Endpoint (VTEP)
MAC-in-UDP
Asymmetric IRB
Symmetric IRB
Description
A) Encapsulates Layer 2 traffic into Layer 3 packets
B) Encapsulates MAC frames within UDP for VXLAN transport
C) Handles routing on different VTEPs for ingress and egress
D) Performs routing at both ingress and egress on the same VTEP
a) VXLAN Tunnel Endpoint (VTEP) - A
MAC-in-UDP - B
Asymmetric IRB - C
Symmetric IRB - D
b) VXLAN Tunnel Endpoint (VTEP) - A
MAC-in-UDP - B
Asymmetric IRB - D
Symmetric IRB - C
c) VXLAN Tunnel Endpoint (VTEP) - A
MAC-in-UDP - C
Asymmetric IRB - B
Symmetric IRB - D
d) VXLAN Tunnel Endpoint (VTEP) - A
MAC-in-UDP - D
Asymmetric IRB - C
Symmetric IRB - B
 
05. Refer to the exhibit.
What can be determined from this show command?
a) VTEP1 only accepts traffic from a 4.4.4.4 source address.
b) VxLAN QoS has been enabled on the remote VTEP.
c) VPN has been enabled on the local device.
d) Interface loopback 33 has been configured with 4.4.4.4 as an IP address.
 
06. Which of the following can be used to classify traffic for QoS in SONiC?
a) IP addresses
b) VLAN IDs
c) DSCP (Differentiated Services Code Point) values
d) MAC addresses
 
07. What factors should be considered when selecting an Enterprise SONiC bundle?
a) Network scalability requirements
b) Security and compliance needs
c) The number of available IP addresses
d) The required level of software support
 
08. When installing SONiC using the ONIE manual method, you must first __________ the ONIE environment before loading the SONiC installation image.
a) Download
b) Initialize
c) Reboot
d) Configure
 
09. On which interfaces should traffic policing be applied?
a) Console interfaces
b) Outgoing interfaces
c) Incoming interfaces
d) Loopback interfaces
 
10. What two actions occur when applying dynamic port breakout on an interface?
a) Interface name is changed.
b) 802.1x dynamic VLAN assignment applied.
c) Interface configuration removed.
d) Speed set based on inserted transceiver type.
e) Breakout applied after reboot.

Answers:

Question: 01
Answer: b
Question: 02
Answer: d
Question: 03
Answer: a, b
Question: 04
Answer: a
Question: 05
Answer: d
Question: 06
Answer: a, b, c
Question: 07
Answer: a, b, d
Question: 08
Answer: b
Question: 09
Answer: c
Question: 10
Answer: a, c

Note: For any error in Dell Technologies Certified SONiC Deploy (D-SNC-DY-00) certification exam sample questions, please update us by writing an email on feedback@edusum.com.

Rating: 4.8 / 5 (110 votes)